Philips 21PV375/07 manual Manual TV channel search, Using the satellite receiver, Automatic Tuning

FWD 1- B

0..9

FWD 1- B

PLAY B-K

FWD 1- B

FINISH

PLAY B-K

PLAY B-K

PLAY B-K

Manual TV channel search

In some cases it can occur that all TV channels are not found and saved during the first installa- tion. In this case, the missing TV channels must be searched for and stored manually.

1.Press MENU . The main menu will appear.

2.Select 'TUNER SET UP' with

	STOP C-L		and confirm with			FWD 1- B			.
3.Select 'MANUAL TUNING' with
								PLAY B-K
			and confirm with						.
	STOP C-L					FWD 1- B
4.										. Then
Select 'PROG.' with					PLAY B-K		STOP C-L
press				.
		FWD 1- B

MANUAL TUNING

→PROG. P55

CHANNEL 055

DECODER [OFF]

SKIP[OFF]

SELECT K L CHOOSE B

END=EXIT

5.With PLAY B-K STOP C-Lor 0..9 , select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press .

What is a special channel?

TV channels are transmitted in certain pre-defined fre- quency ranges. These ranges are divided into channels. A specific frequency/channel is assigned to each TV sta- tion.

Certain frequency ranges are specified as special chan- nels (hyperband channels).

6.Select 'CHANNEL' with STOP C-L ,

and confirm with . Then enter the

desired channel with .

When a channel is found,it will stop searching. If

this is the channel you want, press . If you set 'SKIP' on for a channel, this channel will be ignored when going through the channels

with PROG P+ or PROG P– .

To search for other TV channels, begin again at step 4.

I don't know the channels for my TV stations In this case, press PLAY B-K STOP C-Lin 'CHAN- NEL' to start the automatic channel search. A changing channel number will appear on the TV screen. Continue the automatic search until you have found the desired TV channel.

7.To end, press STATUS/EXIT .

Using the satellite receiver

You can receive channels from the satellite

receiver via the scart socket AV1/EXT1 .

To do this, select the channel number 'AV1' by pressing 0,0,1, with the keys 0..9 on the remote

control.You will have to select the channel you want to receive on the satellite receiver itself.

Automatic Tuning

During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are reinstalling the TV-Video Combi, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones. 1.Press MENU . The main menu will appear.

2.Select 'TUNER SET UP' with STOP C-Land confirm with FWD 1- B .

3.Select 'AUTO TUNING' with STOP C-L , and confirm with FWD 1- B .

PLEASE WAIT

START

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

4.The automatic TV channel search starts. This allows the TV-Video Combi to save all avail- able TV channels. This procedure may take several minutes.

5.When the TV channel search is complete, 'AUTO TUNING COMPLETED' will briefly appear on the TV screen.

Sorting of TV channels from P01 to P06 will be performed automatically as follows.

P01: BBC1

P02: BBC2

P03: ITV

P04: CH4

P05: CH5

P06: SKY NEWS

7

EN