IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases,

the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.

Warning

Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired.The damage mentioned above is not covered under your warranty.

Service

The casing cover should be opened only by qualified service personnel.

If there is any need for any document for repair or integration, please contact with your local service center. (please refer to the chapter of "Consumer Information Center")

For transportation information, please refer to "Technical Specifications".

Do not leave your monitor in a car/trunk under direct sun light.

Note

Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.

1.2 Notational Descriptions

The following subsections describe notational conventions used in this document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type.These blocks contain notes, cautions or warnings.They are used as follows:

Note

This icon indicates important information and tips that help you make better use of your computer system.

Caution

This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.

Warning

This icon indicates the potential for bodily harm and tells you how to avoid the problem.

Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.

2

Page 4
Image 4
Philips 220B2, 220BL2 user manual Notational Descriptions

220BL2, 220B2 specifications

The Philips 220BL2, 220B2, and 220B2CS/00 series of monitors are designed for performance, ergonomics, and sustainability, making them an excellent choice for both professional and home office settings. These monitors feature a 21.5-inch display with Full HD resolution (1920 x 1080 pixels), ensuring that users can enjoy crisp, clear visuals, whether for work or leisure.

One of the standout technologies in this series is the IPS panel, which offers wide viewing angles of up to 178 degrees. This characteristic significantly enhances color consistency and image quality, allowing users to view the screen from different angles without any degradation in performance. The brightness level of up to 250 nits, along with a contrast ratio of 1000:1, provides vibrant colors and deep blacks, contributing to an overall excellent viewing experience.

Ergonomics is a crucial feature of the Philips 220 series monitors. They are equipped with various tilt and height adjustment options, allowing users to customize their viewing position for maximum comfort. This adjustability helps to reduce neck and eye strain during long hours of work, promoting better posture and improving productivity.

Moreover, these monitors are designed with energy efficiency in mind. They comply with Energy Star 7.0 and TCO Certified, which means they consume less power without compromising performance. The SmartPower technology further optimizes energy consumption by automatically adjusting brightness levels based on the content being displayed, contributing to lower energy costs and a reduced carbon footprint.

Connectivity is another feature that enhances the usability of the Philips 220 monitors. They come with a variety of ports, including DisplayPort, VGA, and HDMI, providing flexibility in connecting to various devices like laptops, desktop computers, and gaming consoles.

In summary, the Philips 220BL2, 220B2, and 220B2CS/00 monitors combine impressive technological features with a focus on ergonomics and sustainability. With their high-resolution displays, innovative IPS technology, energy-efficient designs, and a range of connectivity options, they cater to the diverse needs of modern users, whether for work, study, or entertainment. The Philips 220 series stands as an ideal solution for those seeking reliability and quality in their display technology.