A:Yes, you can change your color setting through OSD control as the following procedures,
1.Press "OK" to show the OSD (On Screen Display) menu
2.Press "Down Arrow" to select the option "color" then press "OK" to enter color setting, there are five settings as below.
a.Original; this setting load the default panel setting in terms of color tone. (Note: different panel maker may feature a different color temperature*)
b.9300K; this setting features the panel closed to
c.6500K; this setting features the panel closed to
d.sRGB; this is a standard setting for ensuring correct exchange
of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc.)
e. User Define; the user can choose his/her preference color setting by adjusting red, green, blue color.
*A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
Q:Can the Philips LCD Monitor be mounted on the wall?
A:Yes. Philips LCD monitors have this optional feature. Four standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories. We recommend to contact your Philips sales representative for more information.
RETURN TO TOP OF THE PAGE
Screen Adjustments
Q:What is the FPadjust program on the
A:The FPadjust program generates alignment patterns that help you adjust monitor settings such as Contrast, Brightness, Horizontal Position, Vertical Position, Phase and Clock for optimal performance.
Q:When I install my monitor, how do I get the best performance from the monitor?
A:
1.For best performance, make sure your display settings are set at 1680x1050@60Hz for 22". Note: You can check the current display settings by pressing the OSD OK button once. The current display mode is shown in OSD first page.
2.To install the Flat Panel Adjust (FPadjust) program located on the monitor setup
3.Run FPadjust by double clicking the shortcut. Follow the instructions
