Philips 222E1SB/27 user manual Image vibrates on the screen

Troubleshooting

	● Check that the VGA cable is properly connected to the
Image vibrates on the screen	graphics board or PC.
Vertical flicker appears
	● Press the Auto button.
	● Eliminate the vertical bars using the Phase/Clock of More
	Settings in OSD Main Controls.

Horizontal flicker appears

The screen is too bright or too dark

An after-image appears

An after-image remains after the power has been turned off.

Green, red, blue, dark, and white dots remains

●Press the Auto button.

●Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls.

●Adjust the contrast and brightness on On-Screen Display. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your sales representative).

●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours

●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after- image will disappear after a peroid of time.

●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.

file:///D/Rachel/PHILIPS/222E1/222E1%20EDFU/lcd/manual/ENGLISH/222E1/safety/saf_troub.htm (2 of 3)2009/8/5 下午 03:26:08