SRU252_V4_Transfer_RR:SRU252_V4_Transfer 
4
2Press the RU 252’s TV key to select
TV.
3 Check whether all the keys are working. For an overview of the keys and their functions see ‘3. Keys and functions’.
–If the TV responds as it should to all of the key commands the RU 252 is ready for use.
•If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’.
Setting the remote control
This is only necessary if your appliance does not respond to the RU 252.
If that is the case, the RU 252 does not recognize the brand and/or model of your appliance and you need to program the remote control to do so.
The example below (TV) instructs you how to do this.You can repeat the same steps for other appliances (VCR/DVD players/recorders) which you want to operate using the RU 252.
Example of TV:
1Turn on the TV manually or use the original remote control.
Tune in to channel 1.
2Look up the brand of your TV in the code list at the back of this manual. One or more
Note the first code.
Be careful! There are separate tables for TV, VCR and DVD. Make sure you use the codes from the correct table.
3 Keep the TV Key pressed for 3 seconds until the green indicator light remains lit.
4Then enter the code noted in step
2 using the digital keys.
–The green indicator light will now
flash twice. If the light flashes once for an extended period, the code has not
been entered properly or the wrong code has been entered. Start again from step 2.
5Point the RU 252 at the TV and check that it responds as it should.
–If the TV responds to all of the key commands, the RU 252 is ready for use. Do not forget to note your code.
4EN
