Philips 35LC, 25LC important safety instructions To Replace Guide Comb, To Remove Guide Comb

1. VOLTAGE

2. TRIMMING

3. ONE STEP SELECT 7-POSITION HAIR

LENGTH SELECTOR AND REMOVABLE

4. GUIDE COMB ATTACHMENT

This Hair Clipper operates only on 110-120V AC. In North

1. Connect cord provided to

Hair Clipper.

GUIDE COMB ATTACHMENT

The Guide Comb may be removed if you are:

B. TO REPLACE GUIDE COMB

America, Central America, and South America, the most com- mon voltage is between 110V and 130V AC. If operating this Hair Clipper on a higher for- eign currency, a 50-Watt con- verter should be used. An adaptor plug may also be nec- essary for cord usage in for- eign countries. When travel- ing overseas, it is suggested that you take all adaptor plugs with you to ensure compatibil- ity to most foreign outlet con- figurations.

2. Plug into 120V AC outlet.

3. Slide ON/OFF switch ON.

■ Begin trimming.

4. When finished, turn Hair

Clipper OFF and unplug.

IMPORTANT: The Removable Guide Comb Attachment must be in place on the Hair Clipper in order to use the One Step Select Switch.

The One Step Select Switch allows you to adjust to seven different hair lengths, so that you may achieve the exact length and look you want.

1.To adjust settings, push One Step Select Switch to desired setting.

2.Hair Length Selector will “click” and automatically lock into place at each setting (Fig. 1).

■Start at higher setting (#6 or #7), to prevent trimming off too much hair.

■As you become familiar with the settings, adjust One Step Select Switch to desired trim- ming length (Fig. 2).

■defining/outlining hair line edges

■trimming nape of neck

■trimming with a comb or fingers

A. TO REMOVE GUIDE COMB

1. Be certain Hair Clipper is in

OFF position.

2. While holding Hair Clipper

base with one hand, grasp

sides of Guide Comb and

1.Be certain Hair Clipper is in OFF position.

2.Hold Hair Clipper in one hand and replace Guide Comb until it “clicks” into position.

NOTE: The Guide Comb can be placed on the Hair Clipper only one way. If it does not fit properly at first, reverse it.

Norelco Travel Adaptor Plugs (Model TP5), 50-Watt Converter (Model TC50) or Adaptor/50-Watt Converter Kit (Model TK3) may be pur- chased at a store near you or at a Norelco Service Store Location.

■Use only the cord provided.

1
2	SETTINGS

7 leaves hair approximately 17 mm in length

6 leaves hair approximately 15 mm in length

5 leaves hair approximately 13 mm in length

4 leaves hair approximately 11 mm in length

3 leaves hair approximately 9 mm in length

2 leaves hair approximately 7 mm in length

1 leaves hair approximately 4 mm in length

gently lift Guide Comb away

from Hair Clipper (Fig. 3).

NOTE: One Step Select Switch may be on any setting when removing Guide Comb and when trimming without Guide Comb.

3