Philips 25TR19C1 Hooking UP Your TV Basic Antenna TV Connections, If your antenna has a round

HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)

ANTENNA		SMART
combination antenna receives		HELP
Anormal broadcast channels		Remember:
(VHF 2-13 and UHF 14-69).	Note: For homes with separate UHF and VHF antennas	Be sure to set the
Your connection is easy since		TV for the type sig-
	you will need an optional combiner to connect to the TV.
there is only one 75Ω (ohm)		nal you've connect-
antenna plug on the back of your	U/V	ed (see the “Tuner”
		section on page 11
TV - and that’s where the antenna	Combiner
		of this manual.)
goes.
BEGIN		To set the TV to
If your antenna has a round		select only the chan-
cable (75 ohm) on the end, then		nel numbers in your
you're ready to connect it to the TV.	Back of TV	area see how to
If your antenna has flat twin-lead		“Program" or "Add"
wire (300 ohm), you first need to		channels in the TV’s
attach the antenna wires to the screws	75-300 Ohm Adapter	memory on page 12
on a 300 to 75 ohm adapter.		(Auto Program sec-
		tion).
Push the round end of the adapter		To order any option-
(or antenna) onto the 75Ω plug
on the rear of the TV. If the round		al accessory contact
		your dealer or the
end of the antenna wire is threaded,
		Philips Parts Center
screw it down tight.
		at 1-800-851-8885.

75 V

Combination VHF/UHF			2
Antenna
(Outdoor or Indoor)	1	300 to 75Ω
		Adapter	75 V
	Twin Lead		Back of TV
	Wire
		OR

Round Cable 75Ω