Update using OAD (On the Air software Download)

If Professional mode is [On], your TV automatically receives software updates in semi-standby mode without notice on screen.The TV restarts after the software update is complete.

Access decoder channel

You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV.The decoder or a descrambler must be connected to EXT1 (SCART).

Change TV preferences

1 Press MENU.

2 Press to select [Setup] > [Installation] > [Preferences].

3 Press OK or to enter [Preferences]. [Location] Optimises TV settings for

your location - home or shop.

Note

If [Shop] mode is selected:

The [Smart picture] setting will be switched to [Vivid] automatically to display the brightest backlight on screen.

E-sticker is applicable to display the TV selling features on screen.

[Volume bar] Displays the volume bar when adjusting the volume.

[Channel info.] Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

[EasyLink] Enables one-touch play and one-touch standby between EasyLink compliant devices.

[E-sticker] For shop mode only. Sets the location of the e-sticker.

Set decoder channel

Map channels from a decoder or descrambler 1 Press MENU.

2 Press to select [Setup] > [Installation] > [Preferences] > [Decoder].

3 Press OK or to enter [Decoder] menu

.

4 Press to select [Channel] and press OK or to enter.

»A list of analogue channels appears on the screen.

5 Press to select one channel to map to the decoder/descrambler channel and press OK

6 Select [Status] and press OK or to enter.

7 Press to select [EXT 1] (SCART) the connector used by the decoder/ descrambler.

8 Press OK.

9 Press EXIT to exit.

EN 19