ANT.
AUDIO OUTAUDIO OUT
COAXIALCOAXIAL
AUDIO OUT
COAXIAL
Optional Connections 11
•You cannot use a Mini-Disc or
Digital Audio Tape deck to
copy Dolby Digital
Multi-channel surround sound
discs.
•If the disc is not recorded in
Dolby Digital Multi-channel
surround sound,you will not
hear multi-channel sound even
if you use the Digital Stereo
hookup.
•To see if your disc is recorded
in Dolby Digital,look for a
Dolby Digital logo on disc or
on its case.
•To see if your Stereo has
Dolby Digital,look for a Dolby
Digital logo on your Stereo.
Or,refer to the Stereo
owner’s manual.
Digital Stereo Hookups
You can connect the TV/VCR/DVD to a Stereo
that has a Digital Coaxial In jack.Use this
hookup if you want to hear the TV/VCR/DVD
sound through the Stereo instead.Use these
connections for a Dolby Digital-compatible
Stereo or for a Receiver that has a Mini-Disc or
Digital Audio Tape deck.
1Connect the antenna/Cable TV
signal.Details are on pages 9-10.
2Connect a digital audio coaxial
cable (not supplied) to the AUDIO
OUT COAXIAL jack on the
TV/VCR/DVD.
Also connect the cable to the
Stereo’s COAXIAL DIGITAL
AUDIO IN jack.
3If the Stereo is Dolby
Digital-compatible,set DOLBY
DIGITALto BITSTREAM. If the
Stereo is not Dolby Digital-compatible
or if you connected to a Mini-Disc or
Digital Audio Tape Deck,set DOLBY
DIGITAL to PCM.Details are on page 78.
An incorrect setting causes noise
distortion and damages speakers.
To A UDIO OUT
COAXIAL jack
on TV/VCR/DVD
To Stereo’s
COAXIAL DIGITAL AUDIO IN jack
Helpful Hints
T3221UB_EN1 5/8/06 6:29 PM Page 11