Philips 27PC4326 Press SET-UP to remove the Auto Clock, CH Search screen, Then press Enter

4,

7-9

T3221UB_EN1 4/20/06 9:32 PM Page 24

TV/VCR/DTV

24 Setting the Clock (cont’d)

Instructions continued from the previous page.

4 If you already know your PBS channel number, skip ahead to step 8. If you do not know the channel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH. Then press

ENTER.

– SETTING CLOCK –

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH	[ 02]
MANUAL CLOCK SET
D.S.T.	[OFF]
TIME ZONE [OFF]

●The TV/DVD/VCR will search for a channel that carries a time signal. Channels that carry the time will appear at the top of the screen. Use one of these channels when you enter your AUTO CLOCK CH at step 9.

This may take several minutes. An ‘’_ _” appears in the lower left corner of the screen when the search is complete.

– AUTO CLOCK CH SEARCH – 08 10 13

– –

	Press SET-UP to remove the AUTO CLOCK
5 CH SEARCH screen.
6 Press SET-UP to access the menu again.
	Press ▲ or ▼ to select SETTING CLOCK.
7 Then, press ENTER.
8	Press ▲ or ▼ to select AUTO CLOCK CH,
	then press ENTER.
	– SETTING CLOCK –
	AUTO CLOCK	[ON]
	AUTO CLOCK CH SEARCH
	B AUTO CLOCK CH	[ 02]
	MANUAL CLOCK SET
	D.S.T.	[OFF]
	TIME ZONE [OFF]
	Press { or B until the channel number of your
	PBS station appears. Use one of the channel
9 number you found at step 4.
10 Press SET-UP to remove the menu.
	Press STANDBY-ONyto turn off the
11 theTV/VCR/DVDclock.		and let the PBS channel update

11 STANDBY-ON

OPEN/CLOSE

1 2 3

4 5 6

7 8 9

CLEAR+100

0+10

REC MODE		REC
H	PLAY	G
STOP	SLOW	PAUSE
RETURN		TITLE

	ENTER		5-6,
DISC		SET-UP
MENU			10
PICTURE	CH.	VOL.
/SLEEP
SELECT
MODE	DISPLAY	MUTE

Helpful Hints

•During the Auto Clock Channel Search, the picture may be distorted. This is normal.

•If there are no PBS stations available, set AUTO CLOCK to OFF. Set the clock manually.

•If the TV/VCR/DVD is connected to a Cable Box or Satellite Receiver, select the local PBS station on the Cable Box/Satellite Receiver. Set the TV/VCR/DVD to the output channel of the Cable Box/Satellite Receiver (03, 04 or AUX).