Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.The following connection diagrams show you how to connect them to the back or the right side of the TV.
AV1 IN can handle CVBS and YPbPr; AV2 IN CVBS and Y/C; AV3 and AV4 IN digital signals of a e.g. digital HD receiver or Progressive scan DVD; SIDE: CVBS and Y/C.
Recorder | & Connect the RF Antenna 1 to the RF IN socket of |
| your recorder. |
| é Connect another RF cable 2 from the output OUT of |
| your recorder to the TV’s input 75 ø x jack. |
|
|
| CABLE |
75 |
| AV 1 | AV 2 |
|
| in | |
| Monitor | in | |
| out |
|
|
| VIDEO | Y |
|
|
|
| |
| L / Mono |
|
|
3 | AUDIO | Pb | |
R |
|
| |
|
| Pr |
|
“Better playback quality can be obtained if you also connect the Video,Audio Left and Right (only for stereo equipment) AV cables 3 to the VIDEO, AUDIO L and R input jacks of AV2 IN.
The MONITOR OUT connectors can be used to record programmes from your TV. See Record with your recorder, p. 18.
OUT
OUT IN
REC
If your recorder has an S-VHS video jack:
For improved picture quality, connect an
Recorder and other A/V peripherals
&Interconnect your video recorder with extra RF cables 3.
75
OUT
TVx
Monitor | AV 1 | AV 2 |
out | in | in |
VIDEO | Y |
|
|
| |
L / Mono |
|
|
AUDIO | Pb | |
|
|
R
Pr
3
CABLE
4
OUT 1
OUT IN
é To obtain better picture quality, also connect |
the Video,Audio left and Audio right (only |
for stereo equipment) cables to the VIDEO, |
AUDIO L and R input of AV2 IN jacks 4. |
Note: in case of mono equipment, only the left |
loudspeaker reproduces sound. Use a mono to |
stereo adaptor (not supplied) for sound |
VCR
reproduction via all internal loudspeakers. |
When a video recorder is not connected to |
MONITOR OUT you can only record a |
programme from the aerial or from the cable |
system. |
Satellite Receiver
| Monitor | AV 1 | AV 2 |
| in | ||
| out | in | |
| VIDEO | Y |
|
|
|
| |
| L / Mono |
|
|
2 | AUDIO | Pb | |
R |
|
| |
|
| Pr |
|
| COMPONENT VIDEO INPUT |
OUT
SAT
IN
≈
SAT
&Connect the satellite antenna cable 1 to the satellite receiver’s SATELLITE IN jack.
éConnect the Video,Audio left and right (only for stereo equipment),AV cables 2 to the VIDEO, L and R AUDIO input AV2 in jacks.
If your satellite receiver has an S-VHS video jack:
For improved picture quality, connect an
14