Philips 29PT9221/93 manual Install TV Setup, Demo, General, Source

Install TV Setup

General

General

Setup

Menu background Smart surf Factory settings Tilt adjust

OSD Programme title Teletext 2.5 Auto surround Set/Change code Colour

PLL

This menu allows you to change various settings that are presumably adjusted less frequently than most other settings.

Press the i key on the remote control to get information about the selected menu item.

Set/Change code

&Select Set or Change code with the cursor down.

éIf no code exists yet, the menu item is set to Set code. Follow the instructions on screen.

If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen.

All number combinations from 0000 to 9999 are valid numbers.

Source

Source

Setup

AV1

AV2

AV3

AV4

Side

This menu allows you to select the peripheral you connected to one of the external inputs.

&Select Source with the cursor right.

éPress the cursor down to select one of the external inputs.

“Press the cursor right to enter the list of names of peripherals attached to the selected input.

‘Select the peripheral device with the cursor up/down.

Once you have selected the source, e.g.VCR, this AV-input will automatically be selected when your remote control is in VCR mode and when you press the v key on the remote control. See p. 17.

Demo

TV
Setup
Demo	Auto demo
Install	Teletext
	Install
	Main menu
	Picture
	Speakers
	Active control
	Dealer demo - Digital processing
	- Light sensor
	- 3D Y/C Comb filter

The Demo menu allows to demonstrate the TV features separately or in a continuous loop.

&Select Demo in the Main menu with the cursor down.

éSelect Auto demo or one of the features with the cursor right and press the OK key on the remote control.

If Auto demo has been selected the demo will automatically present all the features sequentially in a loop.

Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run one time only, until activated again, and the Demo menu will reappear.

Select Dealer Demo

Select Digital processing, Light sensor and 3D Y/C Comb filter On or Off to really see the difference in picture quality.

In Dealer Demo mode it is possible to change channels with -P+and to adjust the volume.

Note: the Dealer Demo is not part of the automatic sequence and can only be activated separately.

8