8
General
Menu background
Select Yes or No to turn the menu background
on or off.
Factory settings
This resets the picture and sound settings to
their predefined factory values,but maintains
the channel installation settings.
OSD (On Screen Display)
&Select OSD.
éSelect Normal to activate extended channel
and programme information.Minimum will
display reduced channel information.
Note:When subtitles is switched on, see Features,
p.12,display of the programme number is not
possible
Programme title
Select Programme title Yes or No.
When selected Yes,after the selection of a TV
programme or after pressing the ikey on
the remote control,a TV channel which
broadcasts teletext may transmit the name of
the TV channel or the programme title.
When selected No,the programme title will
only appear after pressing the ikey,and not
after the selection of a TV channel.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when Auto Surroundis
switched On.
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours,other background colours
and nicer pictures in the teletext pages.
&Select Teletext level 2.5.
éPress the cursor right to select Teletext level
2.5 On to take advantage of this feature.
“Press the cursor right again to select Teletext
level 2.5 Offif you like the more neutral
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note:It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Set/Change code
The Child lock feature (see TV,Features, p.12)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels,a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&Select Set/Change code.
éIf no codeexists yet, the menu item is set to
Set code.
If a code has previously been entered,the menu
item is set to Change code.Follow the
instructions on screen.
Important:You have forgotten your code!
&Select Change codein the General menu and
press OK.
éPress the cursor right and enter the overriding
code 8-8-8-8.
“Press the cursor again and enter a new
personal 4-digit code.The previous codeis
erased and the new codeis stored.
This menu allows you to change various settings that are presumably adjusted less frequently than most
other settings.
TV Setup The Setup menu contains items that control the settings
of the TV’s functions,features,services and peripherals
you may have connected.
The General menu allows you to change settings that
will typically be accessed only occasionally.
The Source menu allows you to select a source.
Press the ikey on the remote control to get
information about the selected menu item.
General
Menu background
Factory settings
OSD
Programme title
Teletext level 2.5
Auto surround
Set/Change code
Setup
2244.2 gb 13-10-2003 09:37 Pagina 8