HP 3080 manual 4Computer Setup-Boot

Table 3-3Computer Setup—Advanced (continued)

OptionDescription

Onboard Serial Port 1 Allows you to select a setting for the onboard serial port:

	●	Disabled
	●	3F8/IRQ4
	●	2F8/IRQ3
	●	3E8/IRQ4
	●	2E8/IRQ3
PCI Device SERR#	Disables/enables SERR#.

Computer Setup—Boot

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 3-4Computer Setup—Boot

Option	Description
F9 Boot Menu	Disables/enables F9 Boot Menu.
F10 Setup Prompt	Disables/enables the F10 Setup prompt message on the logo screen.
F11 Recovery	Disables/enables F11 Recovery and provides the option of showing the F11 Recovery prompt
	message on the logo screen. Choose from the following:
	●	Disabled
	●	Enabled no prompt
	●	Enabled and prompt
F12 Boot from LAN	Disables/enables the F12 Boot from LAN prompt message on the logo screen.
Prompt
Hard Disk Boot Seq.	Allows you to specify the order of attached hard drive devices (such as USB HDD storage or USB
	flash media). The first drive in the order has priority in the boot sequence and is recognized as
	drive C (if any devices are attached).
Optical Drive Boot	Allows you to specify the order in which attached optical drives (including USB ODD) are checked
Seq.	for a bootable operating system image.
Network Boot Seq.	Allows you to specify the order in which network devices (including UP NIC cards) are checked for
	a bootable operating system image.
First Boot Device	Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
Second Boot Device	four:
	●	Removable
Third Boot Device
	●	CDROM
Fourth Boot Device
	●	Hard Disk
	●	Network
	NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
	system has started.

HP Pro 3000/3080 – Computer Setup (F10) Utility 17