HP 3080 manual 16Drive Positions

Connector Name	Connector Color	Description
SATA2	light blue	Second hard drive
SATA3	orange	Second optical drive

Drives

A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive.

Drive Positions

NOTE: Your computer model may look different than the model shown below. Diskette drives are only available on some models.

Figure 7-16Drive Positions

13.5-inch external drive bay for optional drive (diskette drive shown)

23.5-inch internal hard drive bay

35.25-inch external drive bay for optional drive (optical drive shown)

To verify the type, size, and capacity of the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide for more information.

Drives 101