HP 3080 manual Heat Dissipation For 115V/60Mhz, 300W 85% EFF ATX, BTU/hr300W 85% EFF, Power Output

Table D-1Specifications – HP Pro 3015 Microtower (continued)

Heat Dissipation	For 115V/60Mhz	For 115V/60Mhz
Maximum	250W PFC HV ATX:	250W PFC HV ATX:
	170.8W or 582.77 BTU/	170.0W or 580.04
	hr	BTU/hr
	300W PFC HV ATX:	300W PFC HV ATX:
	173.3W or 591.3 BTU/hr	169.2W or 577.31
	300W NPFC ATX:	BTU/hr
		300W NPFC ATX:
	174.9W or 596.76 BTU/
	hr	175.0W or 596.42
	300W 85% EFF ATX:
		BTU/hr300W 85% EFF
	157.8W or 538.41 BTU/	ATX:
	hr	153.4W or 523.4 BTU/
	250W PFC HV TFX:	hr
		250W PFC HV TFX:
	173.9W or 593.35 BTU/
	hr	172.3W or 587.89
	250W PFC TFX:	BTU/hr
		250W PFC TFX:
	179.2W or 611.43 BTU/
	hr	174.8W or 596.42
		BTU/hr
Typical (idle)	For 115V/60Mhz	For 115V/60Mhz
	250W PFC HV TFX:	250W PFC HV TFX:
	173.9W or 593.35 BTU/	173.9W or 593.35
	hr	BTU/hr
	250W PFC TFX:	250W PFC TFX:
	179.2W or 611.43 BTU/	179.2W or 611.43
	hr	BTU/hr
Power Supply	115V	230V
Operating Voltage Range	90-132 VAC	180-264 VAC
Rated Voltage Range	100-127 VAC	200-240 VAC
Rated Line Frequency	50-60 Hz	50-60 Hz
Power Output	300 W	300 W
Rated Input Current (maximum)1	8A @ 100 VAC	4A @ 200 VAC

1This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch.

178 Appendix D Specifications