Philips 3121 233 42852 setup guide Basic Tv Connections, Contents, Cable Tv, Antenna Tv

Colorl TV

Quick Use and Setup Guide

CONTENTS

Important Notice/Warning	.1	How to Use the Installation Features	3-4
Making Basic TV Connections		Using the Onscreen menu	. . .3
Basic Cable TV Connections	.1	Using the Language Control	. . .3
Basic Antenna TV Connections	.1	Setting the Tuner Mode Control	. . .3
Basic TV Operation	.2	How to Automatically Program Channels	. . .3
Remote Battery Installation	.2	How to Add and Delete Channels	. . .4
Remote Control Button Descriptions	.2	Glossary of Terms	. . .4

IMPORTANT

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessar- ily match those found with your television set. This is normal and does not require that you con- tact your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.

BASIC TV CONNECTIONS

CABLE TV
	Direct Cable Connection:

AC Power

Your Cable TV input into your home may be a single (75 ohm) cable or a converter box installation. In either case, the con- nection to the TV is very easy. Follow the steps below to connect

your cable signal to your new television.

If your cable signal comes directly from a round 75Ω coaxial cable use the following steps:

1 Connect the open end of the round Cable Company sup- plied cable to the 75Ω input on the TV. Screw it down finger

tight.

Cable signal coming from Cable Company (Round 75Ω coaxial cable)

1

75 ￿
		L
		AUDIO
		R
AV out	CVI	AV in

Wall Outlet

2

Power Plug

from back of TV

2 Plug the television in to the wall outlet and turn the TV on. Refer to the AUTO PROGRAM feature to program all the available channels on your cable signal.

If your cable signal comes from a cable box, use the following steps:

3 Connect the open end of the round Cable Company sup- plied cable to the cable signal IN(put) plug on the back of the Cable Box.

4 Using a separate round coaxial cable, connect one end to the

OUT(put) plug on the back of the Cable Box.

5 Connect the other end of the round coaxial cable to the 75Ω input on the back of the television. Screw it down finger tight.

6 Plug the television in to the wall outlet and turn the TV on. Refer to the TUNER and AUTO PROGRAM features on page 3 of this Quick Use Guide. TUNER should be set to the CABLE option. AUTO PROGRAM can be set to program all the available channels on your cable signal into the televi- sion’s memory.

		Jack Panel Back of TV
Cable Box Connection:
3	4		Jack Panel Back
			of Cable Box

INPUTOUTPUT

	AC Power
Round 75Ω	Wall Outlet
Coaxial Cable

5	Jack Panel Back of TV
			6
Cable Signal IN from
the Cable Company	75 ￿
			L
			AUDIO
NOTE: If your cable box uses			R
separate Audio Outputs, the	AV out	CVI	AV in
connection will have to be
made at the TV’s Audio L & R			Power Plug
AV in jacks.
			from back of TV

ANTENNA TV

Acombination antenna receives normal broadcast chan- nels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75Ω (ohm) antenna plug on

the back of your TV, and that’s where the antenna goes.

1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.

2 Push the round end of the adapter (or antenna) onto the 75Ω (ohm) plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.

3 Plug the television in to the wall outlet and turn the TV on. Refer to the TUNER and AUTO PROGRAM features on page 3 of this Quick Use Guide. TUNER should be set to the ANTENNA option. AUTO PROGRAM can be set to program all the available channels on your cable signal into the televi- sion’s memory.

Antenna Connection:

Outdoor or Indoor Antenna
(Combination VHF/UHF)		AC Power
The combination antenna receives normal
		Wall Outlet
broadcast channels 2-13 (VHF) and 14-69 (UHF).
1	300 to 75-ohm
	Adapter	3
	2
		Jack Panel Back of TV

Twin

Lead Wire

75 ￿

L
AUDIO	Power Plug
R
	from back of TV

Round 75Ω AV out CVI AV in

Coaxial Cable from Antenna

3121 233 42852