Installing a System SmartCard or System Box
NOTE: Before installing a System SmartCard or System Box, ensure the TV is switched off.
1.Inserting the System SmartCard or System Box
•Insert the SmartCard into the SmartCard slot on the rear of the TV (available for certain models only) and connect the other cables as directed by the System provider.
•After the SmartCard has been inserted and the cables connected, switch on the TV.
Sample of |
System |
SmartCard |
•For For the System Box, insert the RJ12 cable of the System Box to the DATA 11 (RJ12) connector on the rear of the TV and connect the other cables as directed by the System provider.
•After all the connection of cables are completed, switch on the TV.
Sample of
System Box
Connect to the Data 1 (RJ 12) connector at the rear of the TV.
2.Setting up the correct Communication Source
Note: The default setting in the Communication menu is OFF. If a System SmartCard or System Box is used with this TV, the Communication menu item must be set to the correct communications protocol. For purposes of providing an example only, SP - I2C
is selected as the communications protocol.
•In the SETUP menu, select
COMMUNICATION.
•Press the > button to enter COMMUNICATION menu.
•Press the > button to select SP - I2C.
COMMUNICATION |
|
COMMUNICATION | SP - 12C |
STORE | > |
ENABLE CARD SLOT | NO |
DCM TYPE | GENERIC |
| 35 |
