Installing a System SmartCard or System Box
3. Enabling the Card Slot
For the System SmartCard or System Box to function, the Card Slot must be enabled.
•Press the > button to select
ENABLE CARD SLOT.
COMMUNICATION |
|
COMMUNICATION | SP - 12C |
STORE | > |
ENABLE CARD SLOT | YES |
DCM TYPE | GENERIC |
•Press the > button to select YES (if applicable).
•Press the > button to select STORE and press the > button to store selections.
4. Selecting the Low Power Standby
For the System SmartCard or System Box to function, NO must be selected.
•In the CONFIGURATION menu, select FEATURES.
•Press the > button to enter the FEATURES menu.
•Press > button and select LOW POWER STANDBY.
FEATURES |
|
SMART POWER | LOW |
SMART SOUND KEY | SMART SOUND |
DEFAULT HDMI 1 AUDIO | EXT3 AUDIO |
DEFAULT HDMI 2 AUDIO | HDMI |
LOW POWER STANDBY | NO |
•Press the > button to select NO.
5.Checking the installation of System SmartCard or System Box
•To check whether the installation is done correctly, press the RECALL button on the green remote control to display menu.
01 26HF7875 / 10 |
|
02 SV1A0707100003 |
|
03 IC7E1 - 0 . 18 |
|
04 LC71HEL1 - 0 . 22 |
|
05 OPT (2C) 12 28 D3 6F |
|
06 OPT - MODEL 26HF7875 / 10 |
|
07 CLOCK OK |
|
08 COMMUNICATION SP - I2C | OFFLINE |
09 TV 1 NOT TUNED |
|
•See item 08 of the menu. If SP - I2C shows “OFFLINE”, check whether the System SmartCard is correctly inserted into the card slot of the TV.
•For System Box, check whether the RJ12 cable and connection between terminal and TV is properly connected.
•For more information, see “Diagnosing Basic Problems” on pages
36