Siemens 611 configurationmanual Cooler connection, Installing the cooling connection adapter

Motor assembly

6.1 Motor assembly

6.1.2Cooler connection

For more information about connecting the cooler, see "Interfaces".

Installing the cooling connection adapter

The components required for connecting the cooler for motors with integrated cooling can usually be installed with standard tools.

The cooling connection adapter is installed using three cylinder-head screws. The cooling ducts are sealed by means of O-rings (see the following diagrams). The cylinderhead screws and O-rings are supplied with the cooling connection adapter.

90	1FW6 Built-in torque motors
	Configuration Manual, 05/2009, 6SN1197-0AD00-0BP7