Siemens 611 Disposing of 1FW6 rotors, Disposal of packaging, Demagnetizing the rotors

Environmental compatibility 13.2 Disposal

13.2.2Disposing of 1FW6 rotors

Disposing of and demagnetizing 1FW6 rotors

The magnetized rotors must be subject to a special thermal disposal procedure so that they do not pose any risk during or after disposal. For this reason, they must be disposed of by a specialist disposal company.

Once the motor has been dismantled, the rotors must be packaged individually in the undamaged original packaging in accordance with the relevant guidelines.

DANGER

Due to the strong magnetic fields, unpacked rotors can cause personal and/or material damage.

Read the safety information provided in this documentation.

Demagnetizing the rotors

Disposal companies who specialize in demagnetization use special disposal furnaces. The interior of the disposal furnace is made of non-magnetic material.

The secondary sections are placed inside a solid, heat-resistant container (such as a skeleton container), which is made of non-magnetic material and left in the furnace during the entire demagnetization procedure. The temperature in the furnace must be at least 300°C over a holding time of at least 30 minutes.

Escaping gases must be collected and decontaminated without damaging the environment.

13.2.3Disposal of packaging

The packaging and packing aids we use contain no problematic materials. With the exception of wooden materials, they can all be recycled and should always be disposed of for reuse. Wooden materials should be burned.

Only recyclable plastics are used as packing aids:

●Code 02 PE-HD (polyethylene)

●Code 04 PE-LD (polyethylene)

●Code 05 PP (polypropylene)

●Code 04 PS (polystyrene)

196	1FW6 Built-in torque motors
	Configuration Manual, 05/2009, 6SN1197-0AD00-0BP7