Motor assembly
6.1 Motor assembly
Example
With torque motor
The active radial force as a result of this centering error is, therefore:
1
PP 
1 PP
Axial forces between the stator and rotor
Table 6- 2 Axial forces (in N) between the stator and rotor during installation
| 1FW609 | 1FW613 | 1FW615 | 1FW616 | 1FW619 | 1FW623 | 1FW629 |
Axial forces (in | 80 | 120 | 150 | 210 | 250 | 300 | 450 |
N) |
|
|
|
|
|
|
|
NOTICE
The attractive forces between the stator and rotor are approximately four to five times greater when the rotor is about to be inserted in the stator.
Requirements of the installation device
The installation device is designed to ensure that the stator and rotor are aligned centrically during the entire installation procedure. The active axial forces must be taken into account during installation.
The installation device must be adapted by the customer in line with the machine construction. It must be sufficiently rigid so that it is not warped by the strong attractive forces between the stator and rotor. Radial forces must be taken into account when the installation device is dimensioned.
The installation device must not have any loose parts.
WARNING
The stator and rotor must not come into contact with each other during centering and installation.
The stator and rotor cannot be separated. The motor can no longer be used. This is why an installation device must be used.
84 | 1FW6 |
Configuration Manual, 05/2009, |
