Storage and transport
12.2 Safety note regarding lifting devices
DANGER
Danger of tilting Motors, stators, and rotors must not be stacked too high – risk of death, personal injury and/or material damage.
Motors, stators, and rotors must not be stacked excessively (packed or unpacked).
Motors and rotors must only be stored and transported horizontally.
Read the warnings and handling instructions on the packaging.
12.2Safety note regarding lifting devices
WARNING
Improper use of lifting devices can cause plastic deformation of the motor.
To lift the motor (or stator/rotor), at least three lifting eyebolts are required. These must be screwed into the tapped holes on the flat motor (or stator/rotor) so that they are symmetrical with each other.
Motors (or stators/rotors) must only be lifted horizontally. The lifting ropes must be the same length. The tightened lifting ropes must form an angle of at least 50° between the lifting rope and motor (or stator/rotor).
194 | 1FW6 |
Configuration Manual, 05/2009, |
