Siemens 611 configurationmanual Commissioning single motors, Entering the motor data

Commissioning

9.2 Procedure

9.2.2Commissioning single motors

Entering the motor data

Select the MLFB of the motor you are using from the commissioning tool list. The motor data will be accepted automatically. Data for motors that are not in the list must be entered manually. For Siemens motors, you can request a data sheet containing converter set values from your relevant Siemens office.

Commissioning a single torque motor (SINUMERIK/SIMODRIVE example)

WARNING

The pulse enable on the Control Unit (terminal 663) must be switched off (de-energized) for safety reasons before the drive is switched on.

168	1FW6 Built-in torque motors
	Configuration Manual, 05/2009, 6SN1197-0AD00-0BP7