The Philips SmartLoader works in 2 modes – Wireless and Wired:

Wireless mode ---- through infrared sensor (15/20HF5234)

 

Switch the SmartLoader to “Wireless” mode by sliding the side-switch to the

icon on the SmartLoader

device. Point the Wireless SmartLoader to the TV’s infrared receiver (optimal distance of 5-30cm) and proceed with the Installation procedure listed below.

Wired mode ---- using the by-packed accessory cable(s) (20/26/32HF5335D)

 

Switch the SmartLoader to “Wired” mode by sliding the side-switch to the

 

 

icon on the SmartLoader

 

 

 

device.

 

Examine the rear connectors of the TV set to determine if the 3-pin or 4-pin female connector wire (packed with the Wireless SmartLoader) should be used. Plug in the correct connector wire to the corresponding opening on the TV set (usually marked as SERV C), and then connect the RJ11 jack end of the accessory wire to the RJ11 socket on the SmartLoader.

The Installation Procedure consists of three simple steps:

1. Choosing a Master TV

The Master TV is the TV set whose installation and configuration settings are to be copied into other TV’s (of the same type only).

2. Programming the SmartLoader with the settings from the Master TV

Follow these steps to program the SmartLoader with the settings of the Master TV.

a)Wireless method

Set the SmartLoader to “Wireless” mode using the side switch.

Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” Key on the SmartLoader.

b) Wired method

Connect the SmartLoader to the TV using the appropriate accessory cable. Set the SmartLoader to “Wired” mode using the side switch.

Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” Key on the SmartLoader.

The Master TV will show the following menu:

SMARTLOADER TO TV >

TV TO SMARTLOADER >

On the TV screen, highlight the menu option “TV TO SMARTLOADER”

Press the right arrow key on the SmartLoader to start the programming process

A number display (from 0~100) will be shown on screen, indicating the percentage of the programming progress from the TV to the SmartLoader. When the programming is completed, “##” will show “100” and the message “DONE” will appear.

TV TO SMARTLOADER ## (0-100)

The SmartLoader is programmed and can be used to install and configure other TVs.

Copying the settings of the Master TV to other TVs with the SmartLoader

Follow these steps to install and configure the settings of a Philips TV with the SmartLoader.

- 6 -

Page 6
Image 6
Philips 32HF9385D manual Installation Procedure consists of three simple steps

32HF9385D specifications

The Philips 32HF9385D is a high-performance television that stands out for its rich set of features and advanced technologies, making it an excellent choice for both home entertainment and professional applications. With its sleek design and a host of functionalities, this model ensures that users enjoy a versatile viewing experience.

One of the main features of the Philips 32HF9385D is its high-definition display, which delivers stunning image quality with vivid colors and sharp details. The Full HD resolution enhances clarity, making it ideal for watching movies, sports, and gaming. The display technology incorporates Philips’ proprietary Pixel Precise HD technology, which optimizes image processing for smoother motion and improved contrast, ensuring that every frame is presented with precision.

In addition to its impressive visual capabilities, the 32HF9385D is equipped with advanced sound technologies. It features built-in speakers that provide clear audio, complemented by Philips’ Virtual Surround Sound technology, which creates an immersive sound experience, bringing movies and shows to life. This combination of high-quality visuals and audio makes it suitable for a home theater setup or for use in commercial environments like hotels and waiting rooms.

The television also boasts connectivity options, featuring multiple HDMI ports, USB inputs, and a digital tuner. This allows users to connect various devices, such as gaming consoles, streaming sticks, and Blu-ray players, enhancing its versatility. Additionally, the USB port supports multimedia playback, enabling users to view photos, videos, and listen to music directly from a USB drive.

For added convenience, the Philips 32HF9385D incorporates smart features, including a user-friendly interface that allows for easy navigation of menus and settings. The television supports various apps and streaming services, providing access to a plethora of content. This smart capability, coupled with energy-efficient design, makes it an eco-friendly option as well.

Overall, the Philips 32HF9385D is a well-rounded television model that merges advanced display and sound technologies with user-friendly features and connectivity options. Its versatility makes it suitable for various applications, from home viewing to professional installations, ensuring a satisfying entertainment experience.