First time installation (Continued) |
| EN |
|
|
|
a |
| Menu language | |
Please select your | English | |
language | Español | |
PHILIPS | Français | |
Hrvatski | ||
using cursor up and | Italiano | |
Magyar | ||
down | ||
............. | ||
| ||
Next |
| |
PHILIPS Installation |
|
This will help you to install the following sections:
Television
Settings assistant
Previous 
Next 
Skip 
Stop
PHILIPS Television
System searching: please wait..........
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of the TV's
1.Press the cursor up/down to highlight your language.
2.Press the OK key on the remote control.
3.Follow the instructions on screen to proceed.
Step 2: complete the initial TV installation procedure
1.Press the green colour key on your remote control when Television is highlighted.
2.Select the country where you are now located.
Notes:
-if you select a wrong country, the channel numbering will not be according to the standard for your country.
-in case the country selected is not
3.Press the green colour key on your remote control to start the Automatic channel installation.
>All available digital TV and radio channels and analogue TV channels are searched for and stored automatically. This will take a few minutes.When the search is complete, the menu will indicate the number of digital and analogue channels found.
Notes:
-reception of digital terrestrial TV channels is applicable dependent on the country selected;
-if you choose to install the channels at a later time, select the Automatic installation in the TV menu, Installation, Channels to scan available channels.
4.Press the red colour key again when the search is completed.
Digital channels found | 16 |
Analogue channels found | 22 |
Stop |
|
9
