Philips 32PF9641D/10 Introduction Digital TV, Switch the TV on, First time installation

EN Introduction: Digital TV

Next to analogue broadcast reception, your TV has a built-in TV tuner which receives, decodes and displays digital terrestrial signals.

Digital TV and radio channels are only available and reproduced:

-when Digital Video Broadcasting Terrestrial (DVB-T) is applicable in your local area;

-and if DVB-T signal is supported by your TV for the country you live in. See www.philips.com/support for the list of supported countries.

Switch the TV on

<Press the power switch B at the side of the TV.

>An indicator on the front of the TV lights up and the screen comes on.

<If the TV is in standby mode, press the -P+keys or the B key on the remote control.

Note: the first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure. See First time installation, p. 9.

First time installation

The installation procedure consists of a series of screens that will guide you through the installation of your TV.

Follow the instructions on screen.

Note: if the TV has already been installed before and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 13.

8