18 Connect Peripheral equipment
AV3/AV4 input connectors will accept the
following signals from HD set top box (HD-STB)
decoders and progressive scan DVD players:
ED 480p 31.470 kHz 60 Hz
HD 1080i 33.750 kHz 60 Hz
HD 576p 31.250 kHz 50 Hz
AV3/AV4 input connectors also accept the following
1250 line HD display formats (available on selected
HD-STB decoders) as detailed in the Australian DTV
Receiver Standards:
HD 1152i (1250) 31.250 kHz 50 Hz
HD 1080i (1250) 31.250 kHz 50 Hz
Connect the equipment with 2 Fh RGB output to
the RGB connector and to the Land R AUDIO
jacks of AV3.
Connect the equipment with 2Fh YPbPr output to
the Y, Pb and Pr jacks and to the Land R AUDIO
jacks of AV4.
See also the manual of your High Definition
equipment.
Inputs AV3 and AV4 also allow horizontal and
vertical picture shift using the remote control
cursor left/right, up/down.
Note:
-60 Hz normally refers to USA markets and 50 Hz to
UK, Europe and Australian markets.
-The AV3 RGB (D-15) connector will accept only the
signal standards 480p/60 Hz, 1080i/50 Hz and
1152i/50 Hz and is only for TV standards.
It is not a PC connector.
Warning: in case you notice scrolling images,wrong
colours or no colour, no picture,or even combinations of
these on your screen, check if the connections are done
in the right way.
Headphone
&Insert the plug into the headphone socket L
at the right side of the TV.
éPress ¬on the remote control to switch off
the internal loudspeakers of the TV.
The headphone impedance must be between 8
and 4000 Ohm.The headphone socket has a 3.5
mm jack.
In the SOUND menu select Headphone
volume to adjust the headphone volume.
AV 3
IN
AV 4
IN
VIDEO 2Fh
480p/1080i
Y
Pb
Pr
L
R
RGB
AUDIO
Y
Pb
Pr
L
R
AUDIO
AUDIO
VIDEO
S•VIDEO
3
2
1
L
&Connect your camera or camcorder to sockets
at the right side of your TV.
éConnect the equipment to VIDEO 2and
AUDIO L 3for mono equipment. For stereo
equipment also connect AUDIO R 3.
S-Video quality with an S-VHS, Hi-8 or Digital
camcorder is obtained by connecting the
S-Video cables with the S-VIDEO input 1
(instead of VIDEO 2) and AUDIO inputs
3.
Note: If you prefer,you can also connect the
camcorder to one of the TV’s rear AV IN jacks.
AV3/AV4 Digital High Definition inputSide connections
315 2158.3 (16X24) 09-07-2003 16:50 Pagina 18