Source
Source
Setup
AV1
AV2
AV3
AV4
Side
This menu allows you to select the peripheral you connected to one of the external inputs.
&Select Source with the cursor right.
éPress the cursor down to select one of the external inputs.
“Press the cursor right to enter the list of names of peripherals attached to the selected input.
‘Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this
Demo
TV 
Setup 
Demo 
Auto demo
Install 
Dual screen
PIP
Teletext
Install
Main menu
Picture
Speakers
Active control
Dealer demo - Digital options - Light sensor
- 3D Y/C Comb filter
The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
&Select Demo in the Main menu with the cursor down.
éSelect Auto demo or one of the features with the cursor right and press the OK key on the remote control.
If Auto demo has been selected the demo will automatically present all the features sequentially in a loop.
Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run one time only, until activated again, and the Demo menu will reappear.
Select Dealer Demo
Select Digital options, Light sensor and 3D Y/C Comb filter On or Off to really see the difference in
picture quality.
In Dealer Demo mode it is possible to change channels with
Note: the Dealer Demo is not part of the automatic sequence and can only be activated separately.
10
