6
&Select Automatic install in the Install menu.
Note:All channels must be unlocked in order to autoprogram. If
requested,enter your code to unlock all channels. (See TV,
Features menu,Childlock, p. 13.)
éPress the cursor down.
The autoprogramming option label Start appears.
“Press the cursor right.
‘The message Searching appears and the progress of
autoprogramming is displayed.
When the Automatic installation is complete,the puck navigates
to Install again.
The channel list is automatically filled with all the channel
numbers of the TVchannels transmitted.
Note: Channel numbers and names will always be written in Latin
characters,even when a language has been selected which uses other
characters.
After language is set correctly,you can now search for and store the TV channels in two different ways:
using Automatic Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
Automatic install
Install Start
Install
Searching for and storing TV channels is done channel by
channel.You must go through every stepof the Manual
Installation menu.
&Select Manual install in the Install menu.
éPress the cursor down.
Follow the instructions on screen.
Note:Search or direct selection of a TV channel.
If you know the frequency,the C- or S-channel number, enter the
3 or 2 digits of the frequency or the channel number directly with
the digit keys 0 to 9 (e.g.048).
Repeat to search for another TV channel after you have
stored the selected TV channel.
Manual install
Install
System
Channel
Search
Fine tune
Antenna level
Store

Manual installation

Automatic installation

Store TV channels
2391.2 en 06-09-2004 12:39 Pagina 6