Connect external speakers/amplifier
Stereo amplifier and two extra | Surround speakers |
front speakers |
|
AUDIO
S
AUDIO
To enhance the sound reproduction of your TV you can connect two extra speakers via an external amplifier.
&Connect the audio cables to the audio input of your amplifier and to the AUDIO OUT L and R jacks at the back of your TV.
The output level is controlled by the volume control of your TV.
Note:Turn off the TV and your audio amplifier before connecting them.
Set the audio amplifier’s volume to minimum.
éSelect Centre mode On in the Setup menu, Speakers, see p. 8.
See Sound menu, Surround mode, p. 12 for the available Sound modes.
“Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Setup menu, see p. 8, to have a reference of the loudness of the separate speakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while watching TV as the whole configuration operates with the volume adjustment of your TV.
To enjoy Dolby Pro Logic Surround sound, you can connect two rear speakers with built in amplifiers (or an audio amplifier with rear speakers).
&Connect the audio cables to the rear speakers and to the Dolby surround output S in the AUDIO OUT grouping at the rear of your TV as shown above.
Note:Turn off the TV and the rear speakers before connecting them.
Rear Surround speakers should always be located behind or to either side about 1 m above the listener’s head.
éAdjust the volume of the rear speakers.
Use the Test tone function in the Setup menu, Speakers, see p. 8, to have a reference of the loudness of the surround speakers in relation to the other speakers.
Note: Once you have adjusted the volume of the rear speakers, do not change it while watching TV, as the whole configuration operates with the volume adjustment of your TV.
Dolby Pro Logic Surround amplifier
&Connect the Dolby Pro Logic Surround amplifier to the AUDIO OUT L and R at the back of your TV.
éSelect Centre mode Off in the Setup menu, Speakers, see p. 8.The audio output is now independent of volume, bass, treble and Surround mode settings.
“Turn off the volume of the TV with the mute key ¬.
All volume settings, tone control and speaker connections have to be done via the external Dolby Pro Logic amplifier.
21
