15
Press the vkey on the remote control repeatedly to select EXT1,EXT2or SIDE according to
where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder,recorder) carries out the switching itself, when it is switched on.
To select connected equipment
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Cinema Link surround receiverRecorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
&Press the MENU Ïkey on the remote
control.
éSelect the Recorder or DVD menu with the
cursor up/down.
“Press the cursor left/right,up/down to select
one of the recorder or DVD functions.
The key ®for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the Bkey for 3 seconds,
both TV and the recorder are switched to standby.
Ò p ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Ò p ‡ π † Ï
Prev. Play Stop Play Next Eject
DVD
&Connect the audio cables to the audio input of
your amplifier and to AUDIO L and Rat the
back of your TV.
éThe output level is controlled by the volume
control of the amplifier.
Note: Switch off the TV and your audio amplifier
before connecting them. Set the audio amplifier’s
volume to minimum.
AUDIO

Stereo amplifier and two extra FRONT speakers

2224.1 gb 11-02-2003 08:55 Pagina 15