17
Tips
Care of the screen Clean the TV with a slightly damp soft cloth.Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture Have you selected the correct TV system in the manual installation menu ?
Is your TV or house aerial located too close to loudspeakers,non-earthed audio
equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency. See Installation, p.6.
Are brightness,sharpness and contrast out of adjustment? Select Factor y
settings in the Setup,General menu, p. 7.
Sometimes poor picture quality is possible when having activated an S-VHS
camera or camcorder connected to the right side of your TV and another
peripheral is connected to EXT 1 or 2at the same time. In this case switch
off one of the other peripherals.
No picture Is the aerial connected properly?
Are the plugs tightly connected in the aerial socket?
Is the aerial cable in good condition and does it have suitable plugs?
No sound No sound on any channel? Check the volume isnt at minimum.
Is the sound interrupted with the mute key ¬?
No solution found Switch your TV off and then on again once.Never attempt to repair a defective
for your picture or TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Remote control If your TVno longer responds to the remote control,the batteries may be dead
or the wrong mode (TV or other peripheral,see p. 3) is selected.
You can still use the MENUkey and the -/+ keys at the top of your TV.
Menu Have you selected the wrong menu? Press the MENUÏkey again to exit from
the menu.
Standby Your TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution.
Power consumption:1 W.
2224.1 gb 11-02-2003 08:55 Pagina 17