Philips 37PFL5322S Connecting a VCR or DVD Re- corder, Connecting a decoder and a VCR, EN-26

Connecting a VCR or DVD Re- corder

Connecting with a Eurocable

1.As shown in the figure below, con- nect aerial cables 1 and 2, and connect Eurocable 3.

2.Press thekey on the remote con- trol display Source list.

3.Press the ï key repeatedly to select

EXT2 and press the Æ / key to confirm your selection.

Rear of TV

Cable

Bottom of TV

1

2 3

Recorder

Connecting with an aerial cable

As shown in the figure below, connect aerial cables 1 and 2.

1.Tune in the recorder’s test signal and store the test signal in programme number 0.

For information, see Manual Store on page 10 and the user manual of your recorder.

Cable

Bottom of TV

1

2

Recorder

Connecting a decoder and a VCR

1.As shown in the figure below, connect a Eurocable to your decoder and to the euroconnector port of your recorder. For information, see the user manual of your recorder.

Alternately, you can connect your de- coder directly to EXT1 or EXT2 with a Eurocable.

Warning: Do not place the recorder too close to the TV because some recorders are susceptible to signals from the display. Place the recorder at least half a meter away from the screen.

RecorderDecoder

Downloaded From TV-Manual.com Manuals

EN-26