ÒPress π to enter the channel list.
†Press o or œ in the channel list to select the channel you want to uninstall or reinstall.
ºPress the green key to uninstall or reinstall the channel.
◊Press Menu to quit the menu.
6.3.3Reorder the channels
Change the order of the stored channels.
‡ Press Menu.
® Select Setup > Installation > Channel installation > Rearrange.
ÒPress π to enter the channel list.
† Press o or œ in the channel list to select the channel you want to reorder.
º Press the yellow key to move up the highlighted channel in your channel list.
◊Press the blue key to move down the highlighted channel in your channel list.
‹Press Menu to quit the menu.
6.4Channel management
6.4.1Automatic search
Once a day, early in the morning, the TV searches for all available TV channels automatically. Leave your TV in standby.
Earlier found channels are updated and new channels are stored. Channels not found by the search anymore are removed from the channel list. When Channel management has found or removed channels, a message at TV start up is shown. You can activate or deactivate this message.
‡Press Menu.
®Select Setup > Installation > Channel installation > Startup message.
ÒSelect On or Off.
6.4.2Manual search
You can install the updates at any time.
‡Press Menu.
®Select Setup > Installation > Channel installation > Installation update.
ÒPress π to enter the Installation update menu.
† Press OK.
º Press the green key to start.
The update starts and may take a few minutes. ◊When the update is completed, press the red
key to return to the Channel installation menu. ‹Press Menu to quit the menu.
6.5Digital reception test
If you receive Digital TV broadcasting you can verify the quality and signal strength of a specific channel.
‡Select a channel. ® Press Menu.
ÒSelect Setup > Installation > Channel installation > Digital:Test reception.
† Press π to enter º Press OK.
◊Press the green key to start the test. Information on the quality and the signal strength of this channel is shown.
‹Use the cursor keys to change the frequency to improve the signal or enter a new frequency directly with the digit keys.
≈Press the green key to store the frequency if the signal quality and strength are good.
ÚPress the red key to return to the Channel installation menu.
œ Press Menu to quit the menu.
àTip
To achieve the best results, contact a specialised antenna installer.
6.6Factory settings
You can want to return to the original factory settings. Only picture and sound settings are reset.
‡Press Menu.
®Select Setup > Installation > Factory settings. ÒPress π to enter the Factory settings menu.
† Press OK.
º Press Menu to quit the menu.
28 | Channel installation |
