Philips 40PFL3505D, 40PFL3705D Install channels, Selecting your menu language, Autoprogram

7 Install channels

The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available).This chapter provides instructions on how to reinstall and fine-tune channels.

Selecting your menu language

1 Press MENU on the remote control and select [Language].

Picture
Sound	Select your menu language.	English
Setup
	Seleccione el idioma para el menú.	Español
Features
Language
	Sélectionnez la langue du menu.
USB		Français

2 Select a language and press OK to confirm your choice. 3 Press MENU to exit.

Autoprogram

Before you install channels, ensure that you are registered with your cable TV provider and that your equipment is correctly connected.

1 Press MENU on the remote control and select [Setup] > [Autoprogram].

Picture	Autoprogram
Sound	Channel List
Setup	Add Channels
Features	Antenna
Language
USB

2 Press OK to start the installation.

If you run [Autoprogram] when you have locked channels, a message appears asking to enter your PIN . Enter your PIN in order to complete the installation.

If you have forgotten your PIN, reset it as described in ‘Changing your PIN’ on page 18.

3 Select [Antenna] or [Cable] and press OK.

•When [Antenna] is selected, the TV detects antenna signals. It searches for NTSC and ATSC channels available in your area.

•When [Cable] is selected, the TV detects signals supplied by cable. It searches for NTSC, ATSC, and QAM modulated channels available in your area.

Picture		Back
Sound	Autoprogram will rescan all channels.	Antenna
Setup	Auto programming may take more than 20	Cable
	minutes to complete.

Features	Select your signal source.
Language	Antenna
USB
	Cable	Or
		ANT.IN

•When autoprogramming is complete, the lowest memorized channel will be displayed.

4 Follow the on-screen instructions to complete the installation.

24EN