Use more of your TV
•Volume – Visually impaired (UKonly)
Changes the volume of the selected Visually
impaired audio language in the Setup,Installation
menu.See section 6.1 Automatic installation.
•Balance
Sets the balance of the left and right
loudspeakers to fit best your listening position.
•Audio language
A list of audio languages for the current
programme may be available when digital
channels are installed and broadcasted.
To permanently change the audio language, see
section 6 Channel installation.
•Dual I/II
If broadcasted,you can choose between two
different languages.
•Mono/stereo
If stereo broadcasting is available,you can select
Mono or Stereo per TV channel.
•TV speakers
If you have connected an audio system to the TV
hub,you can switch off the speaker bar.
If your audio system supports Easylink, see
section 7.2.2 Easylink.
Select Automatic to have the sound from your
TV automatically reproduced by your audio
system.
•Surround mode
To select a more spatial sound if broadcasted or
if available from a connected device.
•Headphone volume
Changes the volume of the headphone.
You can mute the speaker bar with ¬on the
remote control.
•Auto volume levelling
Reduces sudden volume differences like at the
beginning of commercials or when switching from
one channel to another.
Select on or off.
•Delta volume
Levels out volume differences between channels
or connected devices.
‡Switch to the channel or device you want to
level out the volume difference.
®Select Delta volume in the Sound menu and
change the volume level.
•Auto surround
Switches the TV automatically to the best
surround sound mode dependant on the
broadcast.
Select on or off.
5.4 Teletext
Your TV has a 1200 pages memory that stores
broadcasted teletext pages and subpages to reduce
waiting time.
To select a teletext page see section 4.6 Select a
Teletext page.
5.4.1 Select a teletext language
Some digital TV broadcasters offer the possibility to
select your preferred teletext language.See section
6.1 Automatic installation.
5.4.2 Select pagenumber subpages
A teletext page number can hold several subpages.
The pages are shown on a bar next to the main
pagenumber.
‡Press Teletext.
®Select a teletext page.
ÒPress por πto select a subpage.
5.4.3 Select T.O.P. teletext broadcasts
T.O.P. teletext (Table of Pages) is not broadcast by
all TV channels.You can easily jump from one
subject to another without using pagenumbers.
‡Press Teletext.
®Press INFO.
The T.O.P.over view appear s.
ÒUse por π,oor œto select a subject.
†Press OK to view the page.
15
ENGLISH
DEMO
v
bq
DEMO
v
bq
2730.3 en 05-03-2009 15:14 Pagina 15
Downloaded From TV-Manual.com Manuals