The first time (and only the first time) you switch on your TV,
you see a Welcome screen followed by the installation
procedure.
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language.
1. Press the cursor up/down to highlight your language.
2. Press the OK key on the remote control.
3. Follow the instructions on screen to proceed.

First time installation EN

9
1. Press the green colour key on your remote control when
Television is highlighted.
2. Press the green colour key on your remote control to start
the Automatic channel installation.
>All available TV channels are searched for and stored
automatically.This will take a few minutes.
3. Press the red colour key when the search is completed.
Note:if you choose to install the channels at a later time,
select the Automatic installation in the TV menu,
Installation, Channels,p. 25,to scan available channels.
Note:if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings,p. 12.

Step 2: complete the initial TV installation

procedure

Step 1: select your on-screen language

a
Previous Next Skip Stop
PHILIPS Television
System searching: please wait..........
Stop
PHILIPS Installation
This will help you to install the following
sections:
Television
Settings assistant
Menu language
English
Français
Chinese
Arabic
.............
Please select your
language.....
PHILIPS
using cursor up and
down
Next
2560.5 en 14-11-2006 14:12 Pagina 9