32
Step 3 Fine-tune analogue channels
1 Press .
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
3 Press YJ\]*YW]*Y,*X,>]]* ~}
Rename channels
You can rename channels. The name appears
when you select the channel.
1 While you wat ch TV, press FIND.
»The channel matrix menu is displayed.
2 Select t he channel to rename.
3 Press OPTIONS.
»The channel options menu appears.
4 Select [Rename channel], then press OK.
»A text input box appears.
5 Press to select each character,
then press OK.
6 When the n ame is complete, selec t
[Done], then press OK.
Tip
Press [Aa] to change an uppercase lett er to a
lowercase lette r and vice versa.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system s ettings are
correct.
1 Press .
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > [System],
then press OK.
3 Select t he correct syste m for your
country or region , then press OK.
Step 2 Search and store new TV
channels
1 Press .
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > *[Find
channel], then pre ss OK.
If you know the three- digit frequency
of the channel, enter it .
To search, select [Search], then press
OK.
3 When the ch annel is found, select
[Done], then press OK.
To store the channel as a new
number, select [Store as new
channel], then press OK.
To store the channel as the
previously selected channel, select
[Store current channel], then press
OK.
EN
Downloaded From TV-Manual.com Manuals