Isotope ®
Blade Installation
Blade Hardware (not to scale)
Blades (5) | Blade Screws and | Phillips | |
Washers (16) | |||
| Screwdriver | ||
|
|
Blade Installation |
|
Step 3a. Slide the end of the blade with the three |
|
holes into the slot located on the blade ring. (The |
|
blades will only fit properly over the screws holes |
|
one way. If the holes do not line up, remove the |
|
blade and turn it over). Using three blade screws |
|
and washers, attach the blade to the blade ring, |
|
as shown in Figure #1. Install three screws and |
|
washer one by one using the provided screwdriver. |
|
Tighten securely by hand only. Repeat until all five |
|
blades have been installed on to the fan as shown |
|
in Figure #2. | BLADE |
| WASHER |
BLADE
SCREW
(Figure #1)
(Figure #2)
11