Step 2e. Attach the fan remote wires to the ceiling bracket wiring by placing the bare end of the wires side by side and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
•GREEN leads from ceiling bracket and motor to GROUND conductor of power source. Secure with wire nut as shown in Figure #4.
•WHITE wire from receiver to the WHITE NEUTRAL conductor wire from the power source. Secure with wire nut as shown in Figure #4.
•BLACK wire from receiver to the BLACK conductor wire from the power source. Secure with wire nut as shown in Figure #4.
Step 2f. After making the wire connections, the wires should be tucked in to the body of the fan as shown in Figure #5. The wires should be spread apart, with the three grounded conductor wires being placed on one side of the fan body and the power conductor wires being placed onto the other side of the fan body separating the connections.
Step 2g. Install 2 fan mounting screws on the left side of each side of the mounting plate #6.
3 GREEN GROUND
WIRES
(Figure #4)
(Figure #5)
2WHITE WIRES
2BLACK WIRES
FAN MOUNTING
SCREWS
(Figure #6)
8
