Introduction
Before You Start
•CAUTION: RISK OF ELECTRICAL SHOCK! Installation is to be in accordance with the National Electrical Code, ANSI/NFPA
•This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations. If it is not, a new box must be installed.
•This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement for the fan with light fixture is 1.67 amps. The fan uses about .83 amp or 100 watts. Maximum light current is about .83 amps or 100 watts of lighting.
•Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy, make sure all wires are within the canopy and that no wires are being pinched.
•WARNING: Do not bend the blade brackets when installing the brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between the rotating fan blades.
Unpacking
Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed in the Parts Guide. Before discarding packaging materials, be certain that all parts have been removed.
For best performance and for your warranty to be valid,
use only genuine Casablanca blades, light fixtures, and accessories.
Safe Use
• The blades in each pack are matched for equal weight | |
| to assure smooth fan operation. If more than one fan |
| is being installed, be careful not to mix blades from |
| different cartons. |
• Inspect the contents of your carton for possible | |
| shipping or handling damage. If parts are missing or |
| damaged, call |
• | It is always a good idea to have an assistant to help |
| with the installation. |
• | When cleaning, painting, or working near your fan, |
| be very careful of the fan and blades. Always turn the |
| power OFF to the ceiling fan before working on it or |
| replacing lightbulbs. |
• | Never insert anything into the path of the fan blades |
| while the fan is in operation. |
• | Never install a fan over a pool or spa. |
Fuse Box | Circuit Breaker |
(Remove fuse for the | (Trip breaker for the |
circuit you will be | circuit you will be |
working on) | working on) |
from wall to end of blade
18"
70"
• Never operate a fan that has been damaged |
in any way. For assistance in obtaining |
service, call Casablanca Fan Company at |
Casablanca dealer. |
from wall to center of fan
84" from bottom edge of blade to floor
Dimensions indicated are the minimum allowable for proper installation.
4