Light bulb and GLASS Installation
Hardware (not to scale)
Glass Shade | 50 |
Halogen Bulbs (2) |
Install Halogen Bulbs
Step 4. Screw the two bulbs into the light fixture as shown in Figure #1.
IMPORTANT! When installing a halogen bulb, carefully cut off the end of the plastic sleeve the bulb comes in and hold the bulb by the plastic sleeve to screw it into the socket.
NOTE: When replacing the bulbs, be sure to use only
Glass Installation
Step 5a. Align the glass shade up with the bottom of the fan as shown in Figure #2 and locate the three glass holding slots. Then locate the three glass hold- ing tabs, located on the light fixture plate.
Step 5b. Carefully lift the glass globe up inside the light fixture as far as it will go. Rotate the shade in a counter clockwise direction as shown in Figure #3, until the glass globe is held tightly in place by the three tabs.
(Figure #1)
GLASS
HOLDING
TABS
GLASS | GLASS |
SHADE | HOLDING |
| SLOTS |
(Figure #2)
(Figure #3)
12