Isotope ® 
Step 2h. Using both hands, lift the fan body from the hook and position the hanging slots on both sides of the fan body, using the two fan mounting screws located on the ceiling mounting plate. Slide the two slots on both sides of the fan body between the head of the screws and rotate the fan body clockwise into the elongated slots as shown in Figure #7.
Step 2i. Install the other two fan mounting screws by holding the fan body cover to the ceiling mounting plate as shown in Figure #8. Tighten all four screws until hand tight.
HANGING
SLOT
(Figure #7)
FAN MOUNTING
SCREWS
(Figure #8)
Step 2j. Before going to the next step, locate the two sets of canopy ring tabs that are on the top edge of the canopy as shown in Figure #9. Now locate the two sets of canopy tab holders found at the top of the fan body near the ceiling as shown in Figure #10.
CANOPY RING
TABS
CANOPY
RING
(Figure #9)
CANOPY
TAB HOLDER 
(Figure #10)
9
