Fan Installation
Ceiling Mounting PLATE Installation
Ceiling Hardware (not to scale)
| 1½" Wood Screws (2) and Washers (2) | Wire Nuts (3) | |
|
|
| Phillips |
| Ceiling Mounting Plate | Screwdriver | |
| 3" Wood Screws (2) | ||
| 1" x | ||
| Washers (2) | Washers (2) | |
|
|
|
|
|
|
|
|
|
|
|
|
Note: After removing the old fixture, check the outlet box to ensure that it is supported by a joist or beam across its upper surface. If not, a 2 x 4 stud must be installed.
Step 1a. Carefully feed the ceiling wires through the center hole of the ceiling mounting plate. Attach the plate, as shown with ground wire down, to the ceiling fixture outlet box with the screws provided. Ensure that the outlet box wires are not pinched by the washers or between the mounting plate and the ceiling.
.
CAUTION:
To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting plate.
JOIST
CEILING WIRING
CEILING FAN
APPROVED
CEILING WIRING BOX MOUNTING
PLATE
WASHERS
GREEN
GROUND WIRE
Outlet Box
Screws
6