Isotope ® 
Motor housing Installation
Ceiling Hardware (not to scale)
Fan Mounting Screws (4) | Wire Nuts (3) |
|
Fan Body
Step 2a. Unlock the canopy cover from the canopy ring tabs to loosen and bring down to fan body as shown in Figure #1.
Step 2b. Remove the fan mounting screws from the fan body and set aside. You will use these later.
Step 2c. Remove the shipping plate from the top of the canopy. Figure #2.
Step 2d. Use the hanging hole on the body of the fan to hang the fan on the hook of the ceiling mounting plate. This will help you in making the electrical connections as shown in Figure #3 and Figure #4.
CANOPY
RING
(Figure #1)
(Figure #2)
| CEILING |
| MOUNTING |
| PLATE |
| HOOK |
HOOK | HANGING |
HOLE | |
HANGING |
|
HOLE |
|
(Figure #4)
(Figure #3)
7
