33
Access CAM services
1 Insert and act ivate the CAM (see ‘Inser t
and activate a CAM ’ on page 38).
2 Press OPTIONS.
3 Select [Common interface].
»Applications provided by the digital TV
service operator are displayed.
Note
This menu option is ava ilable only if the CA M
is inserted and ac tivated correc tly.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1 While you watch TV, press FIND.
»The channel matrix menu is displayed.
2 Press OPTIONS.
»The channel options menu appears.
3 Select [Reorder], then press OK.
4 Select the channel to r earrange, then
press OK.
»The selected channel is highlighted.
5 Move the highlighted chann el to its new
location, then pres s OK.
6 Press OPTIONS.
7 Select [Done reordering], then press
OK.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1 Press .
2 Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3 Enter the frequenc y to test, then press
OK.
4 Select [Search], then press OK.
5 When the channel is found , select
[Store], then press OK.
Note
If the signal qualit y and strengt h is poor,
reposition the ae rial or satellite d ish and retest.
If you still have problems with the reception
of your digital broad cast, contac t a specialised
installer.
English
EN
Downloaded From TV-Manual.com Manuals