42.25HZ
DK
Channel
Auto Tuning
Intelligent Tuning
Manual Tuning
Fine-Tune
Sound System
Programme Edit
Channel set-up involves selecting all the settings required to be able to search for and
store all the channels you can receive. Make sure that the television is switched on
and follow all the steps in turn specified hereafter.
Display the menu by pressing the MENU button. Press theleft or direction button
to select the Channel icon and press the or downdirection or OK button to display
the Channel menu.
Press the up or down direction button to select
Channels are arranged in a pre-set order. Refer to the following sections if you want
to fine tune or skip a channel, or swap two channels.
right
up
1. the Auto Tuning option.
2. Press the direction button or OK button to start channel search.
Note: Depending on the number of channels you receive, it may take several
minutes for the channel search to finish. If you want to interrupt the process,
press the MENU button. The channels already found will be stored.
Always start tunning from channel number 1.
3.
left or right
Intelligent Channel Set-up
This operation will keep all the existed channels and add newly found channels to the
end of the channel list.
ress the up or down direction button to select1. Activate the Channel menu and p the
Intelligent Tuning option.
2. Press the direction or OK button to start intelligent tuning.
Note: If you want to interrupt the process, press the MENU button. The channels
already found will be stored.
left or right
Manual Channel Set-up
Follow the below procedure if you find that some channels have not been stored after
the automatic set-up as well as the intelligent set-up.
right
left or right
left or right
left
or right
Press MENU to return or EXIT to close the menu.
ress theup or down direction button to select
direction button to select
a channel number to store the channel that will be found.
4. If necessary, press the up or down direction button to select the Band option and
direction button to toggle among VHFH, UHF and VHFL.
5. Press theup or down direction button to select
direction button to search manually.
6.
1. Activate the Channel menu and p the
Manual Tuning option.
2. Press the direction or OK button to enter the Manual Tuning menu.
3. Select the Current Channel option and press the
press the
the Search option and press the
Manual Tuning
Current Channel
Band
Search
1
VHFL
49.70 Mhz
Press MENU to return Press EXIT to exit
Fine Tuning a Channel
If the picture is not clear you can fine tune the channel.
1. Activate the Channel menu and p the
Fine-Tune option.
2. Press the left or right direction button for fine tuning
ress the up or down direction button to select
3. Press MENU to return or EXIT to close the menu.

EN 9

Automatic Channel Set-up