6 To activate the locks, switch the TV on and off.
»» When you switch channels with
»» When you access the locked channels from the channel grid, you are prompted to enter your PIN code.
4 Select [Browse USB], then press OK.
5 Select a picture, then press 
OPTIONS.
6 Select [Set as Scenea], then press OK. »» A confirmation message is displayed.
7 Press OK to confirm, then press any button to exit Scenea.
View Scenea
You can display a default picture as the wallpaper on your TV.You can also load another picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer.
Switch on Scenea
1 Press MENU.
2 Select [Scenea], then press OK.
»» If no picture has been set, the default picture is displayed.
»» If a customised Scenea picture is loaded, that picture is displayed (see ‘Customise the Scenea picture’ on page 22).
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
•• When you load a new Scenea picture, it overrides the current Scenea picture.
•• To use another picture as the wallpaper, you need a USB storage device that contains a picture that is less than 1 MB in size.
1 Load a picture smaller than 1MB in size into a USB storage device.
2 Connect the USB storage device to the TV.
3 Press MENU.
Play photos, music and videos on USB storage devices
Caution
•• Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data from the device.
Connect a USB storage device to play photos, music or videos stored on it.
1
2
3
4
View photos
1 In the USB browser, select [Picture], then press OK.
2 Select a photo or a photo album, then press OK to view the photo enlarged to fill the TV screen.
•To view the next or previous photo, press 
or 
.
View a slide show of your photos
1 When a full screen image of a photo is displayed, press OK.
»» A slide show begins from the selected photo.
22EN
