Philips 32PFL5606 Install channels, Automatically install channels, Manually install channels

Press MENU.

Select [Setup] > [Search for channels], then press OK.

Select [Start], then press OK.

»» All available channels are stored. To exit, press OK.

6 Install channels

The first time you setup your TV, you are prompted to select a menu language and to install TV channels. Afterwards, you can re-install channels and customise channels in other ways.

Automatically install channels

You can search and store channels automatically.

Step 1: Select your menu language

1 Press MENU.

2 Select [Setup] > [TV settings] > [Preferences] > [Menu language], then press OK.

3 Select a language, then press OK.

Step 2: Search for channels

Start an automatic search for channels to install on your TV.The available channels are installed on the TV.

1

2

3

4

Manually install channels

This section describes how to search and store analogue TV channels manually.

Step 1: Select your system

Note

•• Skip this step if your system settings are correct.

1 Press MENU.

2 Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation], then press OK.

3 Select [Colour system], then press OK.

4 Select the correct system for your country or region, then press OK.

Step 2: Search and store new TV channels

1 Press MENU.

2 Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] > [Find channel], then press OK.

• If you know the three-digit frequency of the channel, enter it.

• To search, select [Search], then press OK.

3 When the channel is found, select [Done], then press OK.

•To store the channel as a new number, select [Store as new channel], then press OK.

•To store the channel as the previously selected channel, select [Store current channel], then press OK.

26EN